96 lines
1.9 KiB
Markdown
96 lines
1.9 KiB
Markdown
# HannaBox
|
|
|
|
## Microcontroller
|
|
|
|
D1 Mini ESP32
|
|
Due to mp3 playback it needs a multicore esp 32:
|
|
|
|
This library only works on multi-core ESP32 chips like the ESP32-S3. It does not work on the ESP32-S2 or the ESP32-C3 warning
|
|
|
|
## Pins
|
|
|
|
### Amplifier
|
|
```
|
|
26 -> DIN
|
|
27 -> BCLK
|
|
25 -> LRC
|
|
5V -> Vin
|
|
GND -> GND
|
|
```
|
|
|
|
### SD Card
|
|
|
|
```
|
|
CS -> 22 (D1)
|
|
MOSI -> 23 (D7)
|
|
CLK -> 18 (D5)
|
|
MISO -> 19 (D6)
|
|
```
|
|
|
|
### RFID Reader
|
|
|
|
```
|
|
SOA -> 32
|
|
SCK -> 18
|
|
MOSI -> 23
|
|
MISO -> 19
|
|
IRQ -> NC
|
|
GND -> GND
|
|
RST -> 33
|
|
3.3V -> 3.3V
|
|
|
|
```
|
|
|
|
#### RFID Chip Registers
|
|
|
|
Interrupt method was not working because it seems reading a card does not trigger one.
|
|
|
|
See https://arduino.stackexchange.com/a/76285 and https://github.com/miguelbalboa/rfid/blob/master/examples/MinimalInterrupt/MinimalInterrupt.ino
|
|
|
|
|
|
## Buttons
|
|
|
|
```
|
|
Start / Stop -> 17 and GND
|
|
Wake up / Next -> 04 and GND
|
|
Previous -> 16 and GND
|
|
```
|
|
|
|
## System sounds
|
|
|
|
Place these sounds in the folder `system` on the SD card:
|
|
|
|
* sleep.mp3
|
|
* start.mp3
|
|
|
|
sleep.mp3 will be played just before the timed shutdown, start.mp3 will be played if the box started and initialized successfully.
|
|
|
|
|
|
## Battery Voltage
|
|
|
|
The battery voltage is measured by the ADC of pin 13. A voltage divider halves the voltage so that the pin can not be overloaded (max 3.3V).
|
|
The voltage divider consists of two 100kOHM resistors, the voltage is measured between them. One side is connected to the battery and the other to ground.
|
|
Pin 13s ADC (ADC2) can not be used while WIFI is on... damn.
|
|
|
|
## TODOs
|
|
|
|
* Card Reader with SPI. Configure hspi, second SPI channel? Or does SD Card + RFID run at the same channel?
|
|
|
|
|
|
|
|
|
|
## Schematic without modules
|
|
|
|
### Charging circuit
|
|
|
|
https://ww1.microchip.com/downloads/en/AppNotes/01149c.pdf
|
|
MCP73837 ?
|
|
|
|
|
|
|
|
## Links
|
|
|
|
https://github.com/earlephilhower/ESP8266Audio
|
|
|
|
[Running two SPI devices at once](https://randomnerdtutorials.com/esp32-spi-communication-arduino/)
|